24A88 MINI FRONT DOOR WINDOW CHANNEL

This window channel is now supplied without water drain holes

The drain holes can be identified as the larger 6.5mm holes in the chromium plated glazing strip.

The smaller holes in the glazing strip are used for fastenings to affix the channel and glazing strip to the door frame.

TO MAKE DRAIN HOLES IN CHANNEL;
Use chromium plated glazing strip as a template.

Mark drain holes on closed face of Channel.

Using a 3mm drill bit, carefully drill pilot holes through closed face of channel as marked.

14A7630–CHANNEL+14A7631

Vertical rear moulding for the Estate and Traveller rear side windows.

14.4375” or 367mm With the double row channel grooves facing upwards. This is a side view elevation. This channel will require the ends to be cut exactly as above to the original angle of 20 degrees and the correct length as shown which ensures the best fitment. As the material is not the easiest to cut cleanly it is recommended that a new hacksaw blade or good quality snips are used and the channel grooves are packed with wood splints. Alternatively, you can use your old original sample as a template. 14A7631 – FRONT VERTICAL MOULDING HAS SQUARE ENDS, 340MM LONG Alternatively, use your old original sample as a template

14A7630, 14A7631 - Fitting Instructions.

Vertical rear moulding for the Estate and Traveller rear side windows.

With the double row channel grooves facing upwards. This is a side view elevation.

This channel will require the ends to be cut exactly as above to the original angle of 20 degrees and the correct length as shown which ensures the best fitment. As the material is not the easiest to cut cleanly it is recommended that a new hacksaw blade or good quality snips are used and the channel grooves are packed with wood splints. Alternatively, you can use your old original sample as a template.